Iimveliso

I-DINSEN En877 I-Standard Cast Iron Pipe Fittings 45 88 Degree Bend

Iipayipi ze-SML zithunyelwa kumazwe aphuhlileyo eYurophu. Ziya kusetyenziselwa inkqubo yamanzi okukhupha amanzi kwizakhiwo. Ubomi benkonzo bufana kakhulu nobendlu, kwaye ukongezwa kwe-epoxy resin kunokunyusa ubomi benkonzo ubuncinane iminyaka eli-15. I-epoxy resin coating ineempawu zokuxhathisa i-asidi, ukumelana ne-alkali, ukumelana nokuguguleka, ukumelana noxinzelelo, ukumelana nempembelelo kunye nokumelana nokungunda.

uphando iinkcukacha
IiKlampu zePipe zeDINSEN zeNsimbi IiKlampu zeHose eziNzima

Iimbonakalo:
* Izinto: Intsimbi Engagqwaliyo 304/201
* Uluhlu olubanzi lokusebenza kubungakanani ngabunye
* Uvavanyo lokuchasana nokugqwala iiyure ezingama-240 kwi-spray yetyuwa

uphando iinkcukacha
I-DINSEN DN1200 10inch Ductile Iron Pipe yombhobho wamanzi

Umbhobho weNest yeSinyithi/Umbhobho weSML yeSinyithi/Umbhobho we-EN877 yeSinyithi

Ngaphandle: Iinxalenye ezimbini ze-epoxy coating (umbala omnyama) kunye
Ubukhulu bodonga olomileyo obuqhelekileyo yi-40 microns
Ngaphakathi: Iinxalenye ezimbini ze-epoxy coating (umbala omnyama) kunye
Ubungakanani bodonga olomileyo obuqhelekileyo yi-130 mix
Iindlwane zentsimbi ezenziwe ngentsimbi
Ngaphandle: Iinxalenye ezimbini ze-epoxy coating (umbala obomvu-mdaka) kunye
Ubukhulu obuqhelekileyo bodonga olomileyo yi-70 microns
Ngaphakathi: Iinxalenye ezimbini ze-epoxy coating (umbala obomvu-mdaka) kunye
Ubukhulu obuqhelekileyo bodonga olomileyo yi-70 microns

uphando iinkcukacha
I-DINSEN Ixabiso Eliphantsi I-SML EN877 Izixhobo zeHubless ezingwevu kunye neeFittings

Uphawu lweMveliso:

1. Umphezulu ogudileyo;
2. Ukunamathela kakuhle;
3. Ukumelana nokugqwala;
4. Akukho ngxolo;
5. Amandla okutsalwa ≥200 MPa;

uphando iinkcukacha
Isebe eliphindwe kabini leDINSEN 68°

Uphawu lweMveliso:

EN877, ISO6594, CSA B70, CISPI 310
Umbhobho kunye nokufakelwa okungena-Hubless
Izinto eziphathekayo: Intsimbi engwevu
Ukwaleka: SML, KML, BML, TML

uphando iinkcukacha
Umbhobho wokukhupha amanzi we-DINSEN SML EN877 Epoxy Coated Cast Iron Pipe

Umbhobho wokukhupha amanzi we-SML EN877 epoxy coated cast iron pipe

Umgangatho we-1.EN877
2.DN40-DN300
3. Ipeyinti ye-epoxy ngaphakathi, echasene nomhlwa ipeyintwe ngaphandle
4. Ukukhupha amanzi, imvume YAYO

uphando iinkcukacha
I-DINSEN SML Cast Iron Fitting PTT-Trap

Ubungakanani bokulingana be-EN877: DN30-DN300
I-EN877 esemgangathweni
I-EN877 Izinto zokulinganisa i-Cast Iron Iron engwevu
Ukusetyenziswa kweMisele yoLwakhiwo, uKukhupha uNgcoliseko, uGutyulo lwaManzi emvula.

Umzobo
Ngaphakathi nangaphandle, zigqunywe ngomgubo we-epoxy okumgangatho ophezulu nge-fusion, malunga ne-200μm (njengoko ufuna)

uphando iinkcukacha
I-DINSEN EN877 Izixhobo zesinyithi zeNkqubo yoMsele

Izixhobo ze-EN877 Cast Iron Pipe ziquka izixhobo zokubopha imibhobho eziqhelekileyo kunye nezixhobo zokubopha imibhobho yabantu abathandanayo.

uphando iinkcukacha
Umbhobho wesinyithi oqhelekileyo waseYurophu i-SML En 877 Cast Iron System for Seawage System ovela kwiFektri

Izixhobo zombhobho wokukhupha amanzi we-SML EN877 epoxy coated cast iron
Umgangatho we-1.EN877
2.DN40-DN300
3. Ipeyinti ye-epoxy ngaphakathi, echasene nomhlwa ipeyintiwe ngaphandle
4. yokukhupha amanzi, imvume YAYO

uphando iinkcukacha
Iipayipi ze-SML EN877 ze-Hubless Cast Iron kunye neZilinganisi

Umbhobho wesinyithi oqhelekileyo we-DINSEN EN877 uthengiswa kumazwe amaninzi kwihlabathi liphela.

uphando iinkcukacha
I-adaptha ye-Universal Flange

Ukusetyenziswa I-adaptha ye-flange ye-Universal isetyenziselwa ukudibanisa izixhobo ezahlukeneyo zepayipi kunye nezixhobo ezifakwe iiflanged Iimpawu zoyilo Ukunyamezela okukhulu Ukubhola kwe-Universal ukuze kuhambelane ne-PN10 kunye ne-PN16 Iziphelo ze-bolt zikhuselwe ngee-cap zeplastiki Iimpawu zobugcisa Uqhagamshelo lwe-flange end ngokwe-EN1092-2: PN10/PN16 Uxinzelelo oluphezulu lokusebenza: PN16 / 16 bar Ubushushu bokusebenza: 0°C – +70°C Umbala RAL5015 Ugquma lwe-epoxy yomgubo 250 μm ubukhulu Iibholiti, ii-buts kunye nee-washers – ikhabhoni ...

uphando iinkcukacha
Ukuqhaqha iJoint

Iimpawu zobugcisa Uqhagamshelo lwesiphelo seFlange ngokwe-EN1092-2: PN10/PN16 Yenzelwe ngokwe-EN545 Uxinzelelo oluphezulu lokusebenza: PN16 / 16 bar Ubushushu bokusebenza: 0°C – +70°C Umbala RAL5015 Ingubo ye-epoxy yomgubo 250 μm ubukhulu Umzimba owenziwe ngentsimbi ethambileyo EN-GJS-500-7 Iibholiti, amantongomane kunye neewashers – i-hot dip galvanized 8.8 carbon steel Gasket – EPDM okanye NBR Ubukhulu I-DN Flange drill. D L1min L1max Iibholiti Ubungakanani kunye nobungakanani beHole Ubunzima 50 PN10/16 165 170 220 M16 4×19 9...

uphando iinkcukacha

<< < Eyangaphambili 11 12 13 14 15 16 17 Okulandelayo >>> Iphepha 14 / 26

Iimveliso

Qhagamshelana nathi