Ithe tyabaumbhobhoufakelo:
1. Umbhobho ngamnye onobude obuziimitha ezi-3 kufuneka uxhaswe zii-hose clamps ezimbini, kwaye umgama phakathi kwee-hose clamps ezizinzileyo kufuneka ulingane kwaye ungabi ngaphezu kweemitha ezi-2 ubude. Ubude phakathi kwe-hose clamp kunye ne-clamp akufuneki bube ngaphantsi kweemitha ezi-0.10 kwaye bungadluli kwiimitha ezi-0.75.
2. Ufakelo kufuneka lwehliswe kancinci malunga ne-1 okanye i-2% kwaye ubuncinci bube yi-0.5% (0.5 cm ngemitha), kwaye ukugoba kwemibhobho emibini edibeneyo okanye izixhobo akumele kudlule kwi-3°.
3. Umbhobho onqamlezayo kufuneka uqinise zonke izikhonkwane kunye namasebe ngokukhuselekileyo. Kwimitha nganye eli-10-15, kufuneka kuqhagamshelwe ibracket ekhethekileyo kwi-hose clamp ukuthintela umbhobho ukuba ungajiki.
Umbhobho othe nkqoufakelo
1. Ingongoma ezinzileyo ye-riser nayo ikwangumgama ophezulu weemitha ezi-2. Ukuba umgangatho wokuqala uphakame ngeemitha ezi-2.5, umgangatho ngamnye kufuneka ulungiswe kabini, kwaye amasebe angafakwa.
2. Umbhobho wokuphakamisa amanzi kufuneka uqiniswe kwii-30mm ukusuka eludongeni ukuze kube lula ukuwugcina ucocekile. Xa udlula eludongeni ngokuthe nkqo, kufuneka ufake i-hose clamp kunye ne-bracket ezantsi kombhobho.
3. Faka umbhobho wokuxhasa rhoqo emva kwemigangatho emihlanu (iimitha eziyi-2.5 ukuphakama) okanye kwiimitha ezili-15. Sicebisaukulungisayiinkumgangatho wokuqala.
If you need SML pipes , please contact our email: info@dinsenpipe.com
Ixesha lokuthumela: Septemba-09-2021
